This is a component upgrade for all 3-D Loop Parts that are 32.5% stronger, able to withstand temperatures that are 46% higher, and that have 315% more resistance to UV light. The end result increases the default environmental operating parameters from 90 to 131 (direct sunlight) degrees Fahrenheit and winds up to 45 Mph instead of 35Mph.

Alternatively, this kit can be used to Upgrade or Repair your Alpha Loop’s hardware.

Included are:

• 2 – 16-inch masts with coax mounts
• 1 – Tuning Knob
• 1 – X-Wing adapter and 4 mounting screws
• 1 – Tripod adapter kit (Male 1/4 16 to Male 3/8 24 Adapter)

To install the kit the following steps, need to be followed:

1. Remove the cover from the loop.
2. Remove the screws that hold the current backbone in place.
   1. Legacy systems without the X-Wing backbone only:
      1. Remove screws that hold the capacitor’s mounting plate in the tuning box.
      2. Shake the two nuts out of the box that held the screws form the backbone in place,
3. Use the 4 new screws to install the X-Wing backbone after re-installing the screws that held the capacitor plate in place.