Alpha Titan 160 – Five Band OCF Antenna

$349.00

Model: 160M OCF Antenna

160-meter wire antenna system featuring an approximately 173-foot primary element, configurable elevated return element, and Alpha 5:1 matching system. Designed around 1.900 MHz with elevated OCF and ground-counterpoise deployment options.

可在缺货

Shipping: February 1, 2027

产品概述

此 Alpha Titan 160 is a full-size wire antenna system that is designed for operation on 160, 80, 40, 20, and 10 meters, with maximum efficiency on 160-meter operation near 1.900 MHz.

The Alpha Titan 160 provides two distinct installation configurations:

Elevated OCF Configuration: 约 173-foot and 73-foot elements are both elevated, forming an approximately 70/30 Off-Center-Fed Dipole with approximately 246 feet of total radiating wire.

Ground-Counterpoise Configuration: 大约 173-foot primary element is elevated, while a dedicated return wire is deployed along the ground to provide the antenna’s RF counterpoise.

These configurations are electrically different. When both elements are elevated, both wires function as active radiating elements. When configured with a ground counterpoise, the ground-laid wire provides the primary RF return path and interacts with the surrounding soil.

An Alpha impedance-transforming matching system provides the interface between the antenna and 50-ohm coaxial feedline.

主要技术指标

规格 信息
型号 Alpha Titan 160
Operating Bands 160, 80, 40, 20, and 10 Meters
电力 250瓦峰值包络功率单边带;125瓦连续波;25瓦数字
天线类型 Configurable OCF / end-fed wire antenna system
初级元件 约 173 英尺
Elevated OCF Short Element 约 73 英尺
OCF Total Wire Length 约 246 英尺
OCF Feedpoint Position 大约 70/30
配套系统 Alpha impedance-transforming matching system
馈线 50欧姆同轴电缆
Feedline Counterpoise Required No intentional reliance on a specific coax length when a dedicated return element is deployed
Element Ends Electrically open with end insulators
安装选项 Elevated OCF or elevated primary element with ground-laid counterpoise

最适合

  • 160, 80, 40, 20, and 10 meter HF operation
    • An external tuner may be used if the antenna is not placed high and in the clear of surrounding obstacles.
  • Operators wanting a physically substantial 160-meter antenna
  • 160-meter DX and general HF communications
  • Stations with sufficient space for a full-size elevated OCF configuration
  • Installations requiring flexibility in how the RF return is deployed
  • Permanent base installations
  • Field installations with appropriate supports
  • Operators who do not want antenna operation intentionally dependent upon a prescribed coax-feedline length

包括什么

  • Alpha impedance-transforming matching system
  • Approximately 173-foot primary wire element
  • Return/short wire element for the selected deployment configuration
  • Wire-end insulators
  • Feedpoint hardware
  • SO-239 coaxial connection
  • Installation and tuning guidance

设置与操作

Elevated OCF Configuration

Install the Alpha matching system at the elevated feedpoint.

Deploy the approximately 173-foot and 73-foot elements in opposite directions. Both wires function as active radiating elements of the approximately 70/30 Off-Center-Fed Dipole.

Keep the elements elevated and as clear as practical from buildings, utility wiring, metal structures, trees, and other conductive objects.

Each far end remains electrically open. Terminate each antenna wire at an insulator and use nonconductive rope beyond the insulator to secure the antenna to its support.

The approximately 173- and 73-foot dimensions provide the starting geometry for the antenna. Final resonance and SWR vary with installation height, element angle, wire characteristics, nearby objects, and ground conditions.

Ground-Counterpoise Configuration

The Alpha Titan 160 may alternatively be installed with the approximately 173-foot primary element elevated and a dedicated return wire deployed along the ground as the RF counterpoise.

Connect the ground counterpoise to the return side of the matching system and extend the wire away from the feedpoint.

Leave the far end electrically open. Do not connect the distant end of the counterpoise to a ground rod.

The ground-laid counterpoise is not electrically equivalent to the elevated 73-foot OCF element. Ground coupling changes the return conductor’s electrical characteristics, so final resonance and SWR should be verified in the installed configuration.

Coax and Common-Mode Control

Connect the Alpha Titan 160 using 50-ohm coaxial feedline.

A suitable 1:1 common-mode choke is recommended on the coaxial-feedline side of the matching system to minimize undesirable RF current on the outside surface of the coax shield.

The antenna provides a dedicated RF return path and is not intentionally designed around a specific required coax-feedline length.

性能和技术数据

Full-Size 160M OCF Configuration

At the primary 160-meter design frequency near 1.900 MHz, the elevated configuration provides approximately:

  • 173 ft long element
  • 73 ft short element
  • 246 ft total radiating wire
  • 约 70/30 feedpoint location

This provides a full-size Off-Center-Fed Dipole configuration rather than relying upon a substantially shortened 160-meter radiator.

Multiband Operation

The Alpha Titan 160 is intended for operation on:

  • 160米
  • 80米
  • 40米
  • 20米
  • 10米

The final measured impedance and SWR on each band depend upon installation height, wire geometry, feedpoint position, surrounding structures, terrain, and other environmental factors.

Verify SWR on each operating band after the antenna has been installed in its final position.

No Loading Coil

The full-size elevated configuration obtains its 160-meter electrical length through the physical antenna conductors rather than relying upon a loading coil to electrically lengthen a substantially shorter radiator.

Feedline Flexibility

A dedicated antenna return element means the system does not intentionally require a predetermined coaxial-feedline length to complete the antenna.

Use the length of 50-ohm coax appropriate for the installation.

辐射特性

In its elevated OCF configuration, the Alpha Titan 160 operates primarily as a horizontally polarized wire antenna.

Radiation pattern and elevation angle depend strongly upon installation height, element orientation, terrain, and nearby structures.

The ground-counterpoise configuration is electrically different and can exhibit different impedance and radiation characteristics because the primary element remains elevated while the return conductor is coupled to the earth.

安装注意事项

为了获得最佳效果:

  • Install the antenna as high and in the clear as practical.
  • Elevate both the 173-foot and 73-foot elements when deploying the Alpha Titan 160 as an OCF dipole.
  • Keep all elevated element ends electrically open.
  • Use an end insulator and nonconductive support rope at each elevated wire end.
  • Keep the coax approximately perpendicular to the antenna near the feedpoint where practical.
  • Use a common-mode choke on the coaxial-feedline side of the matching system.
  • When using the ground-counterpoise configuration, leave the distant counterpoise end electrically open.
  • Do not ground the far end of the counterpoise.
  • Verify SWR on 160, 80, 40, 20, and 10 meters following installation.
  • Make final element adjustments with the antenna in its normal operating position.
  • Maintain adequate clearance from people, structures, and conductive objects.
  • Always install antennas well away from electrical power lines.

可选配件和兼容配件

Compatible accessories may include:

  • 50-ohm coaxial feedline
  • 1:1 common-mode feedline choke
  • Antenna-support rope
  • Additional wire-end insulators
  • Guying and support hardware
  • Feedpoint support hardware
  • Lightning and static-protection equipment

资源支持

我们听

我们致力于改进所有系统。规格和描述如有变更,恕不另行通知。

0.0
基于0评论
5
0%
4
0%
3
0%
2
0%
1
0%
0 条点评,共 0 条点评

抱歉,没有评论与您当前的选择相符

重量 1磅
尺寸 12 5××在10
品牌

流程条件

生产厂家

产品类别

aggregateRating

颜色

mpn

评估

SKU

VHF UHF HF 天线类型

常见问题

有疑问随时咨询我们
目前为止还没有什么问题
×





滚动到顶部
×